11/9/2023 0 Comments Amd ht link![]() ![]() Also watch your ram speeds, I have to set my ram to 544mhz in the BIOS to end up at 429.6mhz x 2 so 859.2mhz which is as fast as my 800mhz ram likes to run. I have the option of x2, x3, x4, or x5 in my BIOS. For your athlon and my phenom HT are supposed to be 4000mhz but we woul have to do a lot of settings to get it. You want to lower the Chip set multiplier, so take your FSB X the chip set multiplier to get the HT link, 334fsb x 3 1002mhz. Oh well, I am happy so far since I spend a total of $200 on this whole setup and I have a quad core running faster than my old Q6600!ĬPU: Phenom II x2 555BE (unlocked and OC'd to 3. Stock it is set at 500mhz i tried at 1000 with the 2000mhz ht link and ti wont work BUT at 2400mhz ht link i was able to push the onboard radeon4200 passed over the 1000 for a 1100mhz igp. The chart below compares the performance of Intel Xeon CPUs, Intel Core i7/i9 CPUs, AMD Ryzen/Threadripper CPUs and AMD Epyc with multiple cores. CPU-Z mainly reads 1.440v and OCCT reads 1.42-1.44v most of the time when my BIOS voltage is set at 1.46v. The HT Link is 200 x 9 1800mhz at stock and is it even worth it to get higher Haven't read anywhere of the HT Link giving any performance boost but I just want to be sure. I also think my mobo has a bit of vdrop too. So I want to make sure the CPU is stable at 3.8GHz and then I will mess with the other stuff. I think my problem was I was trying to mess with too many things. my bios state that north bridge must be greater or equal than HT link or FSB speed. CEO Github, Chairman of GNOME Foundation Philip. So right now I am running OCCT (about 20 minutes in and it is perfectly stable). PLZ i have pile driver fx 8350, 890fxa-gd 70 and 16gb 1600mhz of ram. Blowing 1.45V through the Athlon 64 X2 4400+ Brisbane that runs at stock 2.3GHz (11.5200), I set the VDDA voltage to 2.728V and lowered the HTT link and memory. Lead Silicon at Apple, AMD, Tesla, Intel, Coauthor X86-64, CTO Tenstorrent Nat Friedman. Get access to the entire offering from Reuters as well as content. So I put my multi at 19x and FSB at 200MHz (stock FSB). Reuters Connect is the most comprehensive digital platform powering the news ecosystem. I think the real problem was I had my ram timings too tight. Had some problems with my HT speed at 2400MHz, so I put it at auto. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |